Maintenance of your Swan - Matic Capper

MAINTENANCE OF YOUR SWAN-MATIC CAPPER

Periodic inspection of the oil level in the capper head housing is recommended to ensure that sufficient lubrication is present.  The high oil level should be 2 ^3/8” from the top edge of the housing. We recommend E.P. SAE 80/90 weight gear oil (our P/N CO95) or equivalent.   Approximately once every six months, it is recommended that the clutch be disassembled, cleaned, and a good grade of lithium grease be applied to the clutch lining to ensure long life and consistent torque. Excessive grease may seep out of the clutch during operation.

← Previous Post Next Post →