| Capping in-the-case is
simplified with a hand-held electric or air capper. These ergonomic,
pendent-type Swan-Matic portable handheld cappers go right to the job!
When freedom of movement is a must, the Model C520 and the Model C530
hand-held cap tightening devices are a practical solution. The
built-in adjustable torque feature allows for repeatable applied
torque. These handheld cappers accept regular Swan-Matic driver shells
and capping inserts. Each air or electrical system includes an
adjustable tension balancer. The handheld capper models are
Push-to-Start, except for Models C530L and C530H which are trigger
operated. Consult the factory for the recommended maximum insert size
for each hand-held capper model. |
C590/C580
The Manual Capper is a low cost solution to
prototype or other limited-volume cappings. The mechanical advantage
gained by using the Manual Capper handle reduces operator fatigue and
increases productivity.....
Full Description and
Information
|
|
Model
|
Description |
|
 |
C520 Air-Operated Handheld Capper
The air operated Model C520 handheld
capper is a convenient tool for capping requirements in the 1 1/2 to
45 in-lb range
Full Description and
Information |
|
 |
C530 Standard Electric Capper
The electrically operated Model C530
handheld capper plugs into a 120 VAC receptacle. Features include:
push-to-start and automatic stop functions.....
Full Description and
Information |
|
 |
C530L Low-Torque Handheld Capper
The electric Model C530L handheld
capper features a separate power supply which allows the unit to be
smaller and lighter for lower torque applications.
Full Description and
Information |
|
 |
C530H High-Torque Handheld Capper
The C530H is a high-torque handheld
capper that features a pistol grip style handle. Ideal for
applications where the top of the bottle cap faces the......
Full Description and
Information |
|
