Continuous Cycle Capping Machine

Variable Speed Cappers

OPTIONS

All electric benchtop models are available for 50Hz and 60Hz operation. The following are options which can be added to enhance machine operation and/or performance:

● Spindle reversing feature to facilitate de-capping

● Longer columns for up to 15 inch containers

● Foot switch for hands-free operation

● Stainless steel shaft and clutch assemblies

● Precision magnetic hysteresis clutches (accurate to 0.1 in-lbs)

● Special machine surface coatings

● Hazardous location motors

● Adjustable height cart

● Corrosion resistant finish

	Model	Description
	(click to enlarge) 49VS/60VS	60VS VARIABLE SPEED CAPPER The Model 60VS variable speed cappers incorporate the convenience of adjustable motor speed with an increased capping speed. Now, at maximum speed, you have up to 57 capping strokes (or cycles) per minute. 60VS Full Description and Information 49VS VARIABLE SPEED CAPPER The Model 49VS capping machine incorporates a variable speed motor for control of critical capping requirements and operator training. The 49VS is an enhanced version of the 49PC and shares some of its characteristics, including dimensions. 49VS Full Description and Information
	(click to enlarge) 49VSA/60VSA	HAZARDOUS LOCATION CAPPER The Air operated models of both the 49PC and 60VS provide the ability to cap bottles in hazardous locations or environments. The cycle rate is controlled by increasing or decreasing the air supply, which should be 90 PSI. VSA Full Description and Information
	(click to enlarge) C600	TRIGGER SPRAY/PUMP CAPS The C600 is designed to tighten TRIGGER SPRAY / FINGER PUMP CAPS. Simple adjustments allow the C600 to handle different container sizes and various cap styles and diameters. Trigger/Pump Capper Full Description and Information