|
The Model C510D Digital Readout Torque
Tester provides a digital readout up to 100 inch-pounds on an LCD
screen which can be upgraded to link the meter with a statistical
program in a computer (Model C510DCI). This torque tester operates
from a 120 VAC power source or from a 9 VDC alkaline battery. It
measures both applied and removal torque and displays the reading on a
large three digit LED display. The readings, accurate to tenths of an
inch-pounds, remain on the display for 30 seconds. When battery
powered or accompanied by the AC adapter, this rugged torque measuring
device can be moved from one work area to another. |
|
|
-
Covers
the entire testing range of cap sizes operating from 0-100 inch lbs. for
both removal and application.
-
Reads
in 0.1 inch lb. increments and the reading is visible on the tester as
well as on the computer screen or printout.
-
Accuracy
of ±2% of full scale or reading.
-
Holds
the peak reading for approximately 30 seconds so that readings can be
recorded manually.
-
Operates
on 110 V using a step-down transformer with 9V output or a 9V alkaline
battery.
-
It is
RS232 capable. Link to your computer or printer by a serial cable.
|
|
Model Number |
Torque Range |
Graduation |
|
|
|
C510D |
0-100 lbin |
12.00 x 0.01 lbin |
|
C510DCI |
0-100 lbin |
50.00 x 0.05 lbin |
|
